<cite id="nzbdn"></cite>

        <sub id="nzbdn"><th id="nzbdn"><var id="nzbdn"></var></th></sub>

          <strike id="nzbdn"></strike>
          <track id="nzbdn"></track>
          <thead id="nzbdn"><meter id="nzbdn"></meter></thead>

            <p id="nzbdn"></p>

              EN CN

              Home / Products / Crushing & sizing

              Ring Granulator


              Ring granulator is an impact-rotor type crusher equipped with ring hammers, which can also self-rotate around hammer axis pin besides rotating with rotor. It is classified into 2 models - light/heavy:


              PHQ (light) model suits to brittle materials of mohs hardness grade 2, including coal, gangue, coke, slag, shale and etc..

              PHZ (heavy) model is for different kinds of rocks of mohs hardness grade 5 and below, including limestone, magnetic iron ore, phosphorous ore and etc..

              Working Principle

              The ring hammer can not only rotate with rotor but also self-rotate around hammer axis pin. After being fed into the crusher, the material are impacted and broken in the cavity by ring hammers rotating at high speed with rotor. With kinetic energy from ring hammer, the broken material are thrown into breaker plates and crushed for the second time while failing on the screen plates. The material are further crushed with shearing, squeezing and grinding by ring hammers and intra-collision, and finally are discharged out of the crusher through screen holes. The unbreakable impurities are pushed into metal collector to be cleaned up by operators. Product size is adjusted by replacing different models of screen plates. The gap between rotor and screen plates can be modified through a regulator mechanism.

              Product Features

                Ring granulator mainly consists of drive unit, rotor, housing body, regulator mechanism and etc..


              • Drive unit

                The rotor is driven directly by the motor through fluid coupling or elastic pin coupling.

              • Rotor

                The rotor is assembled with main shaft, end plates, division plates, hammer pins and ring hammers. Ring hammer is hung over hammer pin fitted between end plates and division plates, which are fixed on main shaft with parallel keys and nuts.



              • Housing body

                The housing body is made of housing, breaker plates, screen plates, impact plates, liners and support plates. Breaker plates and screen plates are installed on support plates, of which one end is fixed on upper housing with a shaft; another end is connected with regulator mechanism through connection plates. Liners are fitted on two sides of inner wall in the housing to protect it from wearing. Breaker plates, screen plates, impact plates and rotor form the breaking cavity. The housing can be opened up at two sides by a hydraulic power pack for easy maintenance.

              • Regulator mechanism

                Regulator mechanism, consisting of worm, gear and gap indicator, is used to modify and indicate the gap between rotor and screen plates.

                Shock-absorption platform is equipped to reduce vibration and noise.

                Bearing temperature and vibration monitor box are provided on site with signals transmitted to main control room.

                Combined with fluidized bed drying system, the ting granulator can adjust moisture content of material while crushing selectively.


              Technical Specification

              Model No.

              Output(t/h)

              Feed size(mm)

              Product size(mm)

              Motor power(kw)

              PHQ/Z1108

              200

              ≤250

              ≤25

              132

              PHQ/Z1111

              300

              ≤250

              ≤25

              185

              PHQ/Z1114

              400

              ≤250

              ≤25

              250

              PHQ/Z1117

              500

              ≤250

              ≤25

              315

              PHQ/Z1218

              600

              ≤300

              ≤25

              355

              PHQ/Z1221

              800

              ≤300

              ≤25

              450

              PHQ/Z1226

              1000

              ≤300

              ≤25

              560

              PHQ/Z1229

              1200

              ≤300

              ≤25

              630

              PHQ/Z1825

              1400

              ≤400

              ≤25

              710

              PHQ/Z1828

              1700

              ≤400

              ≤25

              1100

              PHQ/Z1831

              2000

              ≤400

              ≤25

              1200

              Performance
              Solution to crushing & sizing equipment and system
              Stay updated on your industry GET NEWSLETTER
              Contact

              Future Square, No.55 Industrial South Road, High-tech Zone, Jinan, China

              +86-0531-83323931
              huangfan@andeindustries.com

              ? 2020 ANDE Metallurgical Machinery Equipment Co., Ltd All rights reserved

              Follow us

              Attention to the official account of Ande metallurgy WeChat

              <cite id="nzbdn"></cite>

                    <sub id="nzbdn"><th id="nzbdn"><var id="nzbdn"></var></th></sub>

                      <strike id="nzbdn"></strike>
                      <track id="nzbdn"></track>
                      <thead id="nzbdn"><meter id="nzbdn"></meter></thead>

                        <p id="nzbdn"></p>

                          强壮的公么征服我_饱满大乳欲妇在线播放_亚洲精品国产第一综合99久久_男女吻摸下面一进一出视频